UKRCRC

missions1

hey guys ive just put the dx3.0 rx in the scaler so im now on 2.4ghz

my question is how the god dam do i set the third channel up lol ive read instructions and cant make head nor tale of it lol i just want to be able to turn lights on and off lol but i cant seem to work the third channel

all help appreciated

cheers paul

warfile · Posted: Wed Mar 10, 2010 4:53 pm Post subject:

Hi Paul!

I'm interested too! I have a DX3R and want to put the winch in the 3rd channel.

willashcroft · Posted: Wed Mar 10, 2010 4:54 pm Post subject:

Re read the instructions? Neutral

missions1 · Posted: Wed Mar 10, 2010 4:55 pm Post subject:

doh i forgot that part

you muppet ive read it about 6 times now lol

willashcroft · Posted: Wed Mar 10, 2010 4:59 pm Post subject:

missions1 · Posted: Wed Mar 10, 2010 5:00 pm Post subject:

shut up will unless you have something helpfull to input stop posting rubbish thats no help

blitzer33 · Posted: Wed Mar 10, 2010 6:33 pm Post subject:

Paul, I'm no expert, but I'm sure that the third channel is made to switch a servo from one direction to another, not power up some lights directly.

To make some lights go on and off, you would need to operate a microswitch ( powering the lights) with a servo arm on a servo.
Or buy a ready made light control unit which plugs into your receiver directly to the aux (3rd) channel.

Hope this helps, Steve

wallaz · Posted: Wed Mar 10, 2010 8:46 pm Post subject:

Or use a servo relay

missions1 · Posted: Wed Mar 10, 2010 10:38 pm Post subject:

maxxtraxx · Posted: Thu Mar 11, 2010 8:32 pm Post subject:

i have a light kit on my hpi baja 5b. just set the hand set to , 2P and adjust the raights until the lights work. if the raights are to low they wont work.